Western Snowplows Midweight Series, Руководство механика, Страница: 9 / 104

Lit. No. 48163, Rev. 00 March 15, 2016
9
PRODUCT SPECIFICATIONS
• Solenoid Coil Resistance = 7 ohm at room
temperature
• Solenoid Coil amp Draw = 1.5 amp
• Motor Relay Coil Resistance
Continuous Duty = 16–17 ohm
Intermittent Duty = 5.5 ohm
• Motor Relay amp Draw
Continuous Duty = 0.7 amp
Intermittent Duty = 2.2 amp
• Motor amp Draw (± 50 psi)
UltraMount
®
system – 205 amp at 2250 psi
UltraMount
®
2 system – 205 amp at 2250 psi
• Switched Accessory Lead Draw = 0.75 amp
ELECTRICAL SYSTEM — APPROXIMATE VALUES
Fuses
• 3-Port Module Vehicle Control Harness
Module – 10 amp (Mini)
Control – 10 amp (Mini)
• Plow Module (Qty 2)
4 amp (Mini)
FloStat
®
HYDRAULIC SYSTEM
NOTE: Remove the breather/fill plug slowly to
relieve any pressure in reservoir.
Hydraulic Fluid
• WESTERN
®
High Performance Fluid to
–25°F (–32°C) or other fluid conforming to
Military Specification MIL-H-5606A, such as
Mobil Aero HFA or Shell AeroShell
®
Fluid 4.
Fluid Capacity
• Unit reservoir = 1-3/4 quarts
• System total = 2-3/8 to 2-3/4 quarts
Solenoid valve spool travel = 0.07" (1.8 mm) for
3- and 4-way valves (S2, S3). Travel of 2-way valve
(S1) spool is not detectable with voltage applied
to coil.
Fluid Level
With the system attached to the vehicle, activate
the control. Activate the control FLOAT function
and manually collapse the lift ram all the way.
Remove the fill plug. Fill the reservoir to the top of
the fill hole. Replace the fill plug.
CAUTION
Do not mix different types of hydraulic
fluid. Some fluids are not compatible and
may cause performance problems and
product damage.