Western Snowplows Midweight Series, Руководство механика

Страница: 30 / 104

Lit. No. 48163, Rev. 00 March 15, 2016
30
Hand-Held Master Control
Universal Clear Security
Perform the following steps to unlock and clear an
established security code without using the original
control that was used to establish the code. This
procedure should be used to reset the module if
the security code is unknown.
IMPORTANT: The following steps must be
performed using the Distributor Master Control
(PN 48800). Only the Distributor Master Control
can clear an established code within a snowplow
module without using the original control used to
establish the code.
1. Turn the vehicle ignition to the "OFF" position.
2. With the control power OFF, using the tool that
was included in the Distributor Master Control
box, place the tool over the keypad and push
down on the plate.
NOTE: The only button that should be exposed
is the LOWER button. All other buttons should
be engaged and pressed down.
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever the
snowplow is not in use. The power indicator
light will turn OFF.
AIS
LOWER
ON/OFF FLOAT
Position the Master Control Plate on the keypad
so that only the LOWER button is exposed.
Master
Control
Plate
LOWER
Button
Keypad
3. While pushing down on the plate, turn the
ignition ON.
4. Upon turning the ignition to the "ON" position,
the system will reset and no security code will
be associated with the snowplow.
CONTROLS
SECURITY GUARD™ SNOWPLOW ANTI-THEFT SYSTEM, continued