Western Snowplows Midweight Series, Руководство механика

Страница: 24 / 104

Lit. No. 48163, Rev. 00 March 15, 2016
24
CONTROLS
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever
the snowplow is not in use. The power
indicator light will turn OFF.
Function Time Outs
All control functions, except for LOWER,
automatically time out (stop) after a period of time.
This is to prevent unnecessary battery drain.
The time-out period for the RAISE function is
3.0 seconds, while the angle function time-out
period is 5.5 seconds.
The control will automatically turn OFF after being
idle for 20 minutes.
Smooth Stop
The control automatically allows the blade to coast
to a stop. This results in smoother operation,
reduces the shock to the hydraulic system and
increases hose and valve life.
1. Turn the vehicle ignition switch to the ON or
ACCESSORY position. The control logo area
will become illuminated.
2. Press the ON/OFF button on the control. The
control indicator light will glow red, indicating
that the control is ON. The control indicator
light will glow red whenever the control
ON/OFF switch and the vehicle ignition switch
are both ON.
3. Pressing the LOWER button for 0.75 seconds
will engage the FLOAT mode. The control
indicator FLOAT light will glow. Cancel the
FLOAT mode by momentarily pressing the
RAISE button.
CabCommand HAND-HELD CONTROL
Emergency
Stop
Button Description of Operation
RAISE
Press this button to raise the snowplow and to cancel the FLOAT mode. Function
times out after 4.8 seconds. To resume raising the snowplow, release the button and
press again.
LOWER/FLOAT
Press this button to lower the snowplow. After reaching the desired height, release
the button. Holding the button down for more than 0.75 seconds activates the FLOAT
mode, indicated by green FLOAT lamp.
Cancel FLOAT
Cancel the FLOAT mode by momentarily pressing the RAISE button, turning control
OFF, or turning vehicle ignition OFF. Angling left or right momentarily cancels FLOAT.
RIGHT Press this button to angle blade to the right.
LEFT Press this button to angle blade to the left.