User Guide
3. Management
3.1 OCGUI
3.1.6
Basic Operational Functions
This section provides instructions for basic operational functions that the user is likely to perform during the
initial operation of the OpenFlex F3x00 and E3000 , such as checking the system health, creating a user
account, etc.
3.1.6.1
Navigating to a Device
This task provides instructions for using the OCGUI to navigate to a device's dashboard through any
other fabric-connected device.
Before you begin:
The BMC's MAC address is listed on a label affixed to the module's side. This MAC
address can be used to determine the IP addresses assigned via DHCP to the OpenFlex E3000 chassis
and the F3x00 storage devices contained within it.
Figure 61:
BMC Module MAC Address Label
Step 1 :
Open a browser and enter the IP address for any fabric-connected device into the
address
bar
.
The login page for the device appears:
Step 2 :
Enter a valid username and password, and click the
Login
button:
50
