User Guide
3. Management
3.2 Part Replacement
Table 35:
Replacement Procedure Info
Required Tools
# of People Required
Time Required
None
1
2 minutes
Step 1 :
Unpack and inspect the new OpenFlex F3x00 for damage.
a.
Inspect the packaging that the OpenFlex F3x00 replacement was shipped in and record
any damage to the box. Large cuts, open boxes, and crushed corners should be reported.
b.
Remove the OpenFlex F3x00 from the packaging and verify that there is no damage to the
OpenFlex F3x00 . Dents, scratches, and broken parts should be reported. If major damage
has occurred to the OpenFlex F3x00 , DO NOT use the replacement part.
c.
Store in a safe location until the OpenFlex F3x00 is needed for installation.
Step 2 :
Remove the OpenFlex F3x00 from the enclosure.
a.
From the front of the rack, press the release button on the front of the OpenFlex F3x00 .
The release handle will eject outward.
Figure 214:
OpenFlex F3x00 Release Operation
b.
Use the release handle to pull the OpenFlex F3x00 out of the enclosure part way.
Then grasp the OpenFlex F3x00 from the underside to support it as you pull it
the rest of the way out of the enclosure. See the hand placement in the image.
.
124
