User Guide
3. Management
3.2 Part Replacement
Figure 236:
Front Rack Mount Rail Screw Installation
e.
Install the remaining rail in the same way the first was Installed.
f.
Verify the following to ensure that the rails have been properly installed:
•
Both rails are installed into the rack unit space and are level
•
The front of each rail contains one T15 screw in the rail mount
•
The rear of each rail contains two T15 screws in the rail mount
Step 8 :
Install the Chassis into the rack.
Tip:
A T15 Torx screwdriver is required for this step.
a.
Carefully slide the chassis onto the rails' inward-facing flanges until the chassis mounts are
flush with the mounts on the rails:
Figure 237:
Chassis Installation
b.
Use a T15 Torx screwdriver to install three M5 screws in each rack ear (6 total), securing the
chassis to the vertical rack rails:
136
