LEONARDO PRO II 3000/48 Li
User manual
EN
14
BATTERY AND LOAD STATUS SIGNALS
Table Charging status and output power
State of charge
SOC level 4
, the energy
actually stored in the battery is in a
range between
70% - 100%
of its
nominal capacity (Voltage greater
than 54.4V).
LOAD
output power
level 4
, the
electric
power
of
the
output
consumers is higher than the level of
4000W.
State of charge
SOC level 3
, the energy
actually stored in the battery is in a
range between
50% - 70%
of its
nominal capacity (voltage greater than
48V).
LOAD
output power
level 3
, the
electric power output of the users is
included in a range of
2200W -
4000W.
State of charge
SOC level 2
, the energy
actually stored in the battery is in a
range between
40% - 50%
of its
nominal capacity (voltage greater than
46V).
LOAD
output power
level 2
, the
electric
power
of
the
output
consumers is included in a range of
1300W - 2200W.
State of charge
SOC level 1
, the energy
actually stored in the battery is in a
range between
20% - 40%
of its
nominal capacity (voltage greater than
42V).
LOAD
output power
level 1
, the
electric power output of the users is
included in a range of
200W - 1300W.
Tab.2 State of Charge and Output Power
Since the appliance is equipped with a 1.5m long cable and 25mmq section, it is absolutely recommended to install the
battery bank at a distance that keeps the original cable for connection. Increasing the distance with the battery bank
increases the voltage drop on the cable during operation.
Use the supplied cable to connect the CAN communication cable directly to the battery.
The installation of the appliance on a solid wall in a vertical position is recommended, in order to ensure adequate air
recirculation, due to the forced ventilation of the appliance. For this reason, installation in places rich in dust and dirt must
also be avoided.
Содержание Leonardo Pro II
Страница 1: ...Leonardo Pro II 3000 48 Li Manuale utente User manual IT EN...
Страница 2: ......
Страница 36: ......
