Western Airconditioning AER Slim Seriesl, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 24

5
The unit must not be exposed to direct sunlight or sources of heat. Select a setting within the room so that
the unit can treat the whole room evenly, without, however, occupants being directly hit by the airflow.
4-INSTALLATION
Remove the cardboard packaging and all external polystyrene side protectors before installing. The machine
must always be moved by two people and must be handled only at sufficiently resistant points (metal main
frame), taking care not to damage weaker parts, in particular the filters, the grids and the control unit.
If the CZ accessories (support feet) are present, install them as described in the special section.
For units equipped with cabinet, this must first be removed by following the procedure below. The pictures
below refer to left connections units (standard version SX). For right connection units (optional version DX) the
position of screw to fix cabinet and inlet panel is on the opposite side than below pictures.
With a cross-head screwdriver with a maximum diameter of 3.5 mm. remove the screw in the hole at the right
end of the front intake grille. Rotate forward and lift the intake grille to remove it.
Remove the two screws that secure the cabinet to the fan-coil structure, behind the intake grille.