Western Airconditioning AER Slim Seriesl, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 24

AER
Slim
4
1-INTRODUCTION
The AERSLIM series units are designed for heating, cooling, dehumidification and filtration of residential
buildings and services structures (office blocks, public buildings and the like).
These units are not designed for:
- Outdoor operation
- Operation in damp, explosive or dusty environments
- Operation in corrosive environments, in particular for aluminium battery blades
- Operation in environments exposed to electromagnetic interference
These machines are not intended for operation by persons (including children) with reduced physical, mental
or sensory abilities, or persons who have not received adequate information or training, unless they are
supervised by a person responsible for their safety.
Installation and maintenance of the machines should be carried out by qualified persons (each for their own
specific task) who must have received the necessary instructions. These operations must be carried out in
compliance with the applicable safety regulations in force. These regulations may concern, for example,
occupational safety (use of eye and hand protectors etc.), electrical installations and systems, pressure
vessels, refrigeration equipment, and lifting equipment.
The manufacturer/seller will not be responsible for any damage to persons or property deriving from failure to
observe the prescriptions contained in this manual, failure to carry out regular maintenance or from the use of
non-original spare parts or alteration of the product condition with respect to condition upon receipt.
Additionally, in all the above-listed cases, the product official warranty will be forfeited.
This manual must be kept with the machine at all times.
2-RECEIPT
The machines are delivered packed in cardboard boxes. Do not place weights on top of the cartons and do
not stack more boxes than are in the stacks at the time of delivery.
Check that the identification label shows the same code as ordered and that there is no damage to the
packaging or the product. In case of non-compliance, contact the manufacturer or the seller immediately and
do not install the product.
Do not dispose of any packaging material freely in the environment; dispose of it in compliance with the rules
on waste disposal.
3-POSITIONING
The unit must be fixed to the wall (vertical versions VB, VD) or the ceiling (horizontal versions HB and HD).
The wall must be perfectly vertical (90° with respect to the floor) and the ceiling must be perfectly horizontal
(parallel to the floor). Installation on sloped walls or ceilings or on uneven or curved surfaces is not allowed.
Observe the minimum dimensions shown in the figure, which are necessary for easy installation and correct
operation of the unit.