41
6178-2203
S27 – Bit Mapped Option Status
(Read only)
Bit
Interval
Default
Description
0..1,3
0..3,0..1
0
Synchronous/Asynchronous selection:
0.0-AT&M0 or AT&Q0
1.0-AT&M1 or AT&Q1
2.0-AT&M2 or AT&Q2
3.0-AT&M3 or AT&Q3
0.1-AT&Q4
1.1-AT&Q5
2.1-AT&Q6
2
0..1
0
Reserved
4..5
0..2
0
Synchronous clock selection:
0-Internal clock (AT&X0)
1-External clock (AT&X1)
2-Slave clock (AT&X2)
60..1
0
CCITT or Bell mode selection:
0-CCITT mode (ATB0)
1-Bell mode (ATB1)
7
0..1
0
DTR dial option:
0-No DTR dial (AT&B0)
1-Dialling of stored number,
with DTR (AT&B1)
S29 – Time for ”Hook-flash”
(Not stored with &W)
If ”!” is used at dialling the modem will go on-hook for a short while.
Default
0
{0..255} (1/100 sec).
S30 – Inactivity Timer
(Not stored with &W)
Sets the length of time that the modem will stay on-line before disconnecting
when no data is sent or received. 0 disables this time control.
Default
0
{0..255} (10 sec).
