Westermo MDI-110 Series, Руководство пользователя

Страница: 120 / 128

120
Mirror Mirror set disable ok.
Select Source Port Switch(config)# mirror source fa1-2
both Received and transmitted traffic
rx Received traffic
tx Transmitted traffic
Switch(config)# mirror source fa1-2 both
Mirror source fa1-2 both set ok.
Note: Select source port list and TX/RX/Both
mode.
Select Destination
Port
Switch(config)# mirror destination fa6 both
Mirror destination fa6 both set ok
Display Switch# show mirror
Mirror Status : Enabled
Ingress Monitor Destination Port : fa6
Egress Monitor Destination Port : fa6
Ingress Source Ports :fa1,fa2,
Egress Source Ports :fa1,fa2,
Event Log
Display Switch# show event-log
<1>Jan 1 02:50:47 snmpd[101]: Event: Link 4
Down.
<2>Jan 1 02:50:50 snmpd[101]: Event: Link 5 Up.
<3>Jan 1 02:50:51 snmpd[101]: Event: Link 5
Down.
<4>Jan 1 02:50:53 snmpd[101]: Event: Link 4 Up.
Topology Discovery (LLDP)
Enable LLDP Switch(config)# lldp
holdtime Specify the holdtime of LLDP in
seconds
run Enable LLDP
timer Set the transmission frequency of
LLDP in seconds
Switch(config)# lldp run
LLDP is enabled!
Change LLDP timer Switch(config)# lldp holdtime
<10-255> Valid range is 10~255
Switch(config)# lldp timer