Maintenance and servicing
In the case of signs of wear or defects on the brush, you have the option of
replacing the brush ring with a new one. To do this please follow the following
steps.
12.5.1
Removal and installation of the brush element
On the WR 870 Honda, empty the fuel tank before tipping over the brush. Then
tilt the sweeper for rear access (handles on the ground for a stable grip and safe
access).
Fig. 22 - Replacement of the brush element
The brushes consist of a brush ring, which is held in place by a metal clip. By
loosening the metal clips, it is possible to remove the brush ring.
Assembly takes place in reverse order.
DANGER
Crushing hazard due to dropping of the Radial Sweeper!
The tilting of the Radial Sweeper can happen uncontrolled by
external influences and cause hazards.
Therefore:
Carefully follow the steps listed below when tilting the Radial
Sweeper.
Secure the position of the Radial Sweeper by putting
additional weight on the handle.
Page
37
of
59
After each use, connect the WR 870 Battery to the charger
