28
9 Start-up
9 Start-up
For start-up the hand-held sweeper is brought from the rest position to
the working position.
9.1 Adjusting the handle height
To adjust the height of the handle, a handle height adjustment is provided
allowing the height to be set without tools. Thus, the handle height can
be easily, quickly and ergonomically adjusted for different body heights.
9.1.1 Adjustment process
P
Unlock locking bolts according to the diagram
on both sides.
P
Move the handle into the desired working
position.
P
Lock the latch bolt properly in the bore hole
again.
9.2 Einstellen des Kehrbesens
Depending on the degree of wear of the bristles or depending on the de
-
bris, the height of the brush can be varied continuously, e.g. for long-fi
-
bered debris (hay, straw) a higher setting is required than, for example,
for sand.
The brush height is adjusted via the wing nut.
P
Loosen the wing nut.
P
Turn the adjusting knob until the desired brush
height is reached. Observe the directional
markings for lifting and lowering on the sweeper.
P
Fix the adjusting knob by tightening the wing
nut.
(Fig. 6 - Handle height)
(Fig. 7 - Brush adjustment)
