Westell VersaLink 7550 Скачать руководство пользователя страница 91

Страница: 91 / 95

030-300629 Rev. A

February 2011

User Guide

VersaLink Wireless Gateway (Model 7550)

14.2.3.3

Editing the VC Protocol Settings for WAN Uplink Port

NOTE:

The instructions in this section refer to the Router configured for

Ethernet WAN Uplink port

mode. Be sure

that you have selected

WAN Uplink port

in the

VersaPort

screen.

14.2.3.3.1

Configuring the WAN Uplink Protocol Settings for PPPoE

After you have selected

WAN Uplink port

, in the preceding steps, select the desired protocol from the

Protocol

drop-down menu. If you select PPPoE, the following screen will appear. Select the desired options, and then click

Apply

to save the settings.

NOTE:

1. If you experience any problems, reset the Router by pressing the reset button on the rear of the Router. Or follow

the instructions in section 16.2, “Restore Defaults,” to restore the Router to factory default settings. The actual

information displayed in this screen may vary, depending on network connection established.

2. PPPoE is the factory default setting for WAN Uplink port.

Uplink Settings for WAN Uplink Port (PPPoE protocol)

Tunneling

Factory Default = Enable

If Enabled, this option allows PPP traffic to be bridged to the WAN. This feature

allows you to use a PPPoE shim on the host computer to connect to the Internet

Service Provider, by bypassing the Router’s capability to do this. Factory default is

“Enable.”

Secondary WAN

Factory Default = Disable

The secondary WAN interface is used for multicast traffic. This feature applies only

when you are using PPPoE as the Primary WAN protocol.

Proxy ARP

Factory Default = Disable

When this feature is activated, the VersaLink will respond to ARP requests.

To activate this feature, click Enable.

Содержание VersaLink 7550































































































Результаты поиска

Содержание VersaLink 7550

Отзывы:

Westell VersaLink 7550, Руководство пользователя, Страница: 91 / 95

Результаты поиска

Содержание VersaLink 7550

Отзывы: