030-300432 Rev. A
60 December
2004
User Guide
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays
UP.
(Click on the
connect
button to establish a PPP session). Next, select
Single Static IP
from the
Configuration
menu to confirm that Single Static IP is
enabled
, as shown in the following screen.
STOP! After you enable Single Static IP, you must reboot your computer.
NOTE: If you chose to enable
User Configured PC,
wait for the Router to reset and then manually enter the WAN
IP, Gateway, and Subnet mask addresses you obtained from your Internet service provider into a PC.
