030-300432 Rev. A
38 December
2004
User Guide
After you type your account parameters at the
User Name
screen, the
Account ID
will be displayed, however, the
Password
will be masked for security, as shown below. Click
next
if you want your account parameters to take
effect. Click
reset
if you do not want the account parameters to take effect or if you want to retype the parameters.
Type the VPI and VCI values (
0
for VPI and
35
for VCI default) you obtained from your Internet service provider.
The actual VPI/VCI values may vary according to your ISP. Click on
next
.
NOTE: Depending on your Internet Service
Provider, the
VPI/VCI
screen may come
pre-configured and it will be displayed here.
In this case, you should not change any
values in this screen. Click on
next
to go to
the
PROTOCOL
screen.
VPI =
0
VCI =
35
