030-300432 Rev. A
40 December
2004
User Guide
If you changed the
VPI/VCI
settings and clicked
done
in the
SET-UP COMPLETE
screen, the following pop-up
screen will appear. Click
OK.
NOTE: The following pop-up will appear only if you have changed the
VPI
,
VCI
, or
Protocol
values in the
preceding screens. If you did not change any of these values, this pop-up screen will not appear and the Router will
not be reset. If your Router’s connection setting is set to “Always On” and you have changes any of these values, the
Router will reset automatically. For instructions on editing your connection settings, see section 11.2.
If you clicked
OK
in the pop-up, the following screen will be displayed. The Router will be reset and the new
configuration will take effect. Next, proceed to section 8.2 to confirm your DSL sync.
