030-300381 Rev. A
57
January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
12.2.1 Adding NAT Services to a Profile
This section explains how to add NAT services to your NAT service profile. Remember, you may attach an
unlimited number of NAT services to your profile.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By
selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your
Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT
services, go to section 16 (NAT Services).
To add a NAT service, select
Services
from the
Configuration
menu. Next, Select a NAT service from the options
provided at the
Service Name
drop-down arrow and click on
enable.
If you clicked on
enable
, the following
Host Service
screen will be displayed. Click on
OK.
This will load the new
NAT Configuration and the settings will be saved automatically.
If you clicked on
OK
in the preceding pop-up screen, the
Host Device
screen will be displayed. The
Host Device
screen will allow you to select which device will host the NAT service you selected on your local area network. You
must either select the device from the
Host Device
drop-down arrow or type an IP address in the field labeled
IP
Address.
Click on
done.
