030-300381 Rev. A
55
January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
STOP! After you disable Single Static IP, you must reboot your computer.
12.1.4 Configuring Static IP on Your PC
If you have static IP service (your Internet Service Provider [ISP] supplies static IP addresses), you will need to
perform the following steps to obtain Internet access:
1. Configure your PC settings to obtain an IP address automatically. (Refer to your Windows Help screen for
instructions.)
2. Follow the instruct ions in section 8 (Configuring the Router for Internet Connection).
3. View the settings at the VPI/VCI screen (section 8). You must use the VPI/VCI values that you obtained your
from your Internet service provider If you type any other values in the fields and click on
next
, you will lose
your DSL connection. The connection cannot be restored until you enter the proper VPI/VCI values that you
obtained for your ISP
4. Select
the
Configuration
menu, and then select
Advanced WAN
>
VC
.
5. Click on the
edit
button in the row that displays the VPI/VCI that you obtained from your ISP (section 8). The
VC 1 Configuration
screen will be displayed.
6. Select
Bridge
from the list of Protocol options. Next, under the
VC 1 Bridge Settings
, select
Routed Bridge
as
the Mode.
7. Disable DHCP Client (if enabled) by clicking on the
Disable
radio button adjacent to DHCP Client.
