030-300381 Rev. A
52
January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
If you clicked on
User Configured PC
and then clicked
enable,
the following pop-up screen will appear. Click on
OK
to enable this device for Single Static IP. Click on
Cancel
if you do not want to enable this device for Single
Static IP.
If you clicked on
OK
in the preceding pop-up screen, the following pop-up screen will appear. The Router must be
reset in order for the new configuration to take effect. Click on
OK.
If you clicked on
OK
in the preceding screen
,
the following screen will be displayed. The Router will be reset and
the new configuration will take effect. After the Router has been reset, confirm that you have a DSL sync and that
your PPP session displays
UP.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays
UP.
(Click on the
connect
button to establish a PPP session). Next, Select
Single Static IP
from the
Configuration
menu to confirm that Single Static IP is
enabled
, as shown in the following screen.
