manualshive.com logo in svg

Westbrook Trailers 48-048-K08, Руководство по сборке, Страница: 3 / 34

Поделиться
Скачать
Westbrook Trailers 48-048-K08 Скачать руководство пользователя страница 3

3

Assembly instructions for kit trailers 

P.

Congratulations on the purchase of your kit trailer. Thank you for choosing Westbrook Trailers. 

Safety Information

• 

It is important to read and understand all the instructions. Failure to follow all assembly instruc

-

tions may result in serious injury.

• 

The edges of the trailer frame can be very sharp, it is IMPORTANT to ALWAYS  

wear the provided 

safety gloves when handling the material during unboxing and the assembly process.  

•  It is recommended that you use two people to assemble your trailer since you will need to turn 

the trailer during the assembly. 

• 

Modification of the trailer structure can make the trailer unsafe and void your warranty. 

Any 

modifications made to the trailer must comply with DOT and NHTSA regulations and must not 

compromise the gross vehicle weight rating (GVWR) of the trailer.

Important Information

• 

Included in your kit is the completed New Vehicle Information Sheet (NVIS) or Certificate of Origin 

and the VIN label. These are important documents and are required to register your trailer.  They 

are located on the outside of box #1in a brown envelope. 

• 

If the NVIS form or Certificate of origin hasn’t been completed, please contact us at 866-857-

1445. 

• 

Write the VIN of the trailer and the purchase date in the space below.

• 

Keep this manual and your receipt in a safe and dry place for future reference.

Serial Number :   ______________________________             Purchase Date: _____________________

Unboxing your Trailer

The kit trailer is shipped in 3 boxes containing the following parts: 

Make sure you have received all three boxes of the kit trailer. If any parts are missing or broken, please contact 

us at 

866-857-1445

 

or email us at 

s

[email protected]

.

  When contacting us about your trailer, 

please have the VIN of the trailer and the purchase order number available.

4'x4' & 4'x6' & 4'x8'

• 

Box # 1 -

 Includes tires, fenders, lights, small parts, and hardware. Remove the registration documentation 

affixed outside this box and keep it in a safe place until you are ready to get a license plate. 

• 

Box # 2 

- Includes the axle and all the frame channels.

• 

Box # 3 

- Includes both axle springs.

5'x8'

• 

Box # 1 -

 Includes tires, fenders, lights, small parts, and hardware. Remove the registration documentation 

affixed outside this box and keep it in a safe place until you are ready to get a license plate. 

• 

Box # 2 

- Includes all the frame channels

• 

Box # 3 

- Includes both axle and springs.

Содержание 48-048-K08



































Отзывы:

Нет отзывов