17
Assembly instructions for kit trailers
P.
STEP 3 – Axle Assembly
1. Secure the leaf spring mounting brackets in the square holes on each side of the trailer with the carriage bolt 3/8
x 3/4 and 3/8 lock nut using 9/16 socket; the round holes of the brackets should be oriented closest to the center.
2. Where there is no cross-channel at the fastening location of the mounting bracket use a 3/8 washer as a spacer.
3. Lay the axle between the mounting brackets.
4. Place the springs inside the mounting bracket with eye of the spring towards the front and the flat side towards
the back of the trailer. Secure the spring to mounting bracket with the 9/16 hex bolts and 9/16 lock nuts using 7/8
socket and wrench. Do not over-tighten as there needs to be movement in the spring. Do this for both sides
5. Place the first U-bolt around the axle. Line up the leaf spring mount plate with the oval holes running in the
same direction as your leaf spring. Hand-tighten with the 3/8 locking nut. Repeat for all other U-bolts
6. Secure all the U-bolts with a 9/16 socket.
7. Using two people, flip the frame.
CAUTION! FLIPPING THE TRAILER OVER REQUIRES TWO PEOPLE
Содержание 48-048-K08
