Westbrook Trailers 48-048-K08, Руководство по сборке, Страница: 21 / 34

21 Assembly instructions for kit trailers P.
Step 7 – Hitch and Safety Chains
ITEM # DESCRIPTION QTY
504163 LONG COUPLER CHANNEL 1
504198 TONGUE SUPPORT FOOT - CHANNEL TONGUE 1
500805 1 7/8” COUPLER CLASS I 1
500804 SAFETY CHAIN - 3/16 X 4’ (CLASS I) 1
501031 3/8 NYLON INSERT LOCKING NUT 3
501023 3/8 X 2-1/2” HEX BOLT 1
501024 3/8 X 3” HEX BOLT 2
501060 1/2 X 3 1/2” HEX BOLT 2
501056 1/2 NYLON INSERT LOCKING NUT 2
Assembled the coupler upside down.
1. Place the long coupler channel with the opening facing up.
2. Take the safety chain by the two hooks and find the center link. Place the bolt through the third hole of the
channel and center link, and hand-tighten using the 2-1/2 hex bolt (and 3/8 lock nut .
3. Insert the tongue support foot into the coupler channel as far as it will go.
4. Put the coupler on the channel and secure with 3/8 x 3 hex bolts and 3/8 lock nuts using a 9/16 socket and
wrench, making sure it’s tight enough that the tongue foot doesn’t move but the coupler spring releases.
5. Pull the excess wire through the connection bracket leaving enough wire at the front to connect the white
wire to the coupler.
6. Slide the assembled coupler channel into the tongue connection being careful not to pinch the wiring.
7. Line up the holes with the holes of tongue connection bracket and secure with 1/2 x 3 1/2 hex bolts (& ½ lock
nuts tighten using 3/4 socket and wrench.
8. Remove the 3/8 lock nut (from the chain bolt and place ring terminal of the ground (white wire) on the bolt
and secure holding the 9/16 wrench on the nut and 9/16 socket on the bolt head. Do not over tighten as you
may damage the ring terminal