Westbrook Trailers 48-048-K08, Руководство по сборке

Страница: 20 / 34

20 Assembly instructions for kit trailers
P.
Step 6 - Tongue Connection Support Installation
1. Put the tongue connection bracket with the threaded holes facing up place without sliding it fully into
position
2. Feed each wire of the wire harness between the tongue channel and separate your wire as follows.
• Yellow and brown on the driver’s side
• Green and brown wire on the passenger’s side
• Do not pull the white wire through, you will secure it to the coupler channel once it’s assembled.
3. Slide the tongue connection bracket (in place and hand tighten using the 3/8 x 3/4 flange bolts on top.
4. On the bottom, in the four pre-drilled holes, secure with the cutting screws using a 1/2 socket.
5. Secure the top bolts using 9/16 socket.
6. Tighten all the bolts of the trailer frame using a 9/16 socket and wrench. If you are going to add a plywood
sheet before using the trailer, you don’t need to tighten the top bolts until the plywood has been added.