52
West Mountain Radio
Operating Manual
Select the connected CBA that the license is valid for and click “License.”
Enter your registration information exactly as shown in the email “Licensee:”, “CBA serial #:” and the “License
Key:”. Optionally enter a “CBA Name:”, which is suggested if planning to use multiple CBAs in the future.
Clicking “Identify” will flash the selected CBA’s green LED for a few seconds - which is useful when running a
large group of CBAs on one computer. The default name contains the serial number preceded by “CBA #”. It is
good practice to choose a unique name to identify this particular CBA to distinguish from others that may be in
a larger group running on one computer.
If prompted to do so, close the program after registering the license and then restart the CBA software.
Firmware Updates
Some CBA devices have the capability to be updated with new firmware.
Update Procedure:
Open the list of CBA devices by selecting ‘Tools’ and then ‘CBA Devices’ from the menu.
Select the CBA you wish to update, and if this CBA device has the capability to be updated the ‘Update’ button
will be available.
Clicking ‘Update’ will prompt the ‘Update CBA Firmware’ window. This window provides the selection to choose
which firmware to update using the pull-down labeled ‘File’. Pressing the ‘Update’ button will cause the firmware
to be sent to the CBA.
The ‘Device’ and ‘Status’ section of the window will show a status during the update process. After new
firmware is sent to the device, the ‘Status’ section will say ‘Success’ when the CBA is ready to be used again.
