background image

3

1.

It is the responsibility of the owner to ensure
that all users of the home gym system are
adequately informed of all precautions.

2.

Read all instructions in this manual and in
the accompanying literature before using the
home gym system.

3.

If you feel pain or dizziness at any time
whilst exercising, stop immediately and
begin cooling down. 

4.

Use the home gym system only on a level
surface. Cover the floor or carpet beneath
the home gym system for protection.

5.   Inspect and tighten all parts often. Replace

any worn parts immediately. 

6.   Keep children under 12 and pets away from

the home gym system at all times.

7. The home gym system is designed to be

used by only one person at a time.

8.   Keep hands and feet away from moving parts. 

9.   Always wear athletic shoes for foot protection.

10. Always stand on a foot plate when perform-

ing an exercise that could cause the home
gym system to tip.

11. Never release the press arm, butterfly arms,

leg lever, lat bar, leg press plate, or nylon
strap whilst weights are raised. The weights
will fall with great force. 

12. Make sure that the cables remain on the pul-

leys at all times. If the cables bind whilst you
are exercising, stop immediately and make
sure that the cables are on all of the pulleys.

13.  Always disconnect the lat bar from the home

gym system when performing an exercise
that does not use the lat bar.

14. The home gym system is intended for home

use only. Do not use the home gym system
in any commercial, rental, or institutional set-
ting.

15. The decal shown below has been placed on

the home gym system. If the decal is missing
or illegible, please call our Customer Service
Department at 0345-089009 to order a free
replacement decal. Apply the decal in the
location shown. 

WARNING:

To reduce the risk of serious injury, read the following important precautions

before using the home gym system.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product. 

18

Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The
home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.

TIGHTENING THE CABLES

Woven cable, the type of cable used on the home
gym system, can stretch slightly when it is first used.
If there is slack in the cables before resistance is felt,
the cables should be tightened. Slack can be
removed from the cables by tightening the 1/4” Nylon
Locknuts (2) at the end of the Long Cable (23) (see
drawing 1) and at the end of the Short Cable (58)
(see drawing 2). To do this you may need to remove
the Small “U”-Bracket (67) from the Weight Tube (not
shown) or remove the 3 1/2” Pulley (15) from the
Long “U”-Bracket (57). Make sure that the cables are
not too tight or the Top Weight (76) will be lifted off
the weight stack.

Additional slack can be removed by moving the 3 1/2”
Pulley (15) to the other hole in the Long “U”-Bracket
(57). Remove the 3/8” Nylon Locknut (21) and the
3/8” x 2” Bolt (12) from the Cable Trap (66), Pulley,
and “U”-Bracket. Re-attach the Pulley and Cable Trap.
Be sure that the Cable trap is in the proper position
and that the Cable and Pulley move smoothly.

Note: If a cable tends to slip off the pulleys often,
the cable may have become twisted. Remove the
cable and re-install it.

If the cables need to be replaced, see ORDERING
REPLACEMENT PARTS on the back cover of this
manual.

57

67

76

66

15

2

2

58

12

23

1

2

23

21

Important Precautions

Trouble-shooting and Maintenance

Содержание gym4000
















Отзывы: