Combo High/Low Pull Pulley Machine
Assembly Notes
:
Fasteners provided to assemble machine:
(4) 1/2"X7" BOLTS
(4) 1/2"X6" BOLTS
(1) 1/2"X5-1/2" BOLTS
(2) 1/2"X4" BOLTS
(2) 1/2"X3-1/4" BOLTS
(2) 1/2"X3-3/4" BOLTS
(4) 1/2"X1-3/4" BOLTS
(4) 1/2"X1-1/4" BOLTS
(6) 3/8"X3" BOLTS
(4) 3/8"X2-3/4" BOLTS
Tools required (Not Included):
- 3/4" Open-End Wrench
- 3/4" Socket
- 9/16" Open-End Wrench
- 9/16" Socket
- Needle Nose Pliers
- 6' Ladder
Note: When assembling unit DO NOT
tighten any fasteners until specified.
A
7/2/19
POWER LIFT
REV.
PART NUMBER
R
63410D_assembly cover
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date