WESCO NAVY WMA504EP, Руководство пользователя

Страница: 99 / 186

6. OPERATION MENU
6.1. STARTING UP
!
ATTENTION!
BEFORE STARTING UP THE FIRST TIME, BE SURE THAT THE MACHINE IS WELL INSTALLED.
SEE INSTALLATION MANUAL.
MAKE SURE THAT THE CONFIGURATION AND INITIALIZATION MENU HAVE THE RIGHT SETTINGS.
SEE CHAPTER 4.
6.2. SWITCHING ON THE POWER
The display lights up when you switch on the power.
If the machine is ready to be started, the program overview is shown.
6.3. LOAD THE WASHING MACHINE
Open the door and load the laundry into the drum. When the drum is loaded, close the door.
6.4. PUT SOAP INTO THE SOAP DISPENSER
Put the correct amount of soap into the soap dispenser.
At the wash sequence, it depends of the pre-programmed water inlets in which
the soap dispenser you have to add soap
➜
See paragraph 3.5. for more information
6.5. STARTING A WASH PROGRAM
Use the navigation buttons UP and DOWN and choose the required program.
Press the CONFIRM SELECTION button. If any of the special functions is activated, the
screen for activation of the selected function is shown. Use the ADDITIONAL FUNCTION
SELECTION button and carry out the setting. End the process of selecting function by using
the CONFIRM SELECTION button.
The display shows information on the program, soap dosage and price (for machines with a
coin selector).
Start the program by pressing the START button. If it is a machine with coin selector, make
the payment first.
NOTE:
APPLICABLE TO MACHINES WITH A COIN SELECTOR: SELECTION OF A NEW
PROGRAM WHEN THE MACHINE IS READY TO START OPERATION
If the newly selected program is more expensive:
- the price difference is shown on the display
- it is now necessary to insert more coins so that the price difference between the old and new
program is settled
59