WESCO NAVY WMA504EP, Руководство пользователя

Страница: 128 / 186

DIAGNOSE:
DIAGNOSE:
FAILURE 8: DOOR LOCK CHECK AT START FAILURE
The washing machine will not start a new process when the door is not locked after pressing the START button.
Failure message 8 will be generated each time the door lock sequence could not be finished once started.
FAILURE 9: DOOR LOCK SWITCH FAILURE AT CYCLE END
At the end of the cycle the Door Lock coil is switched off and the door lock switch must open its contact.
If within 30 sec the „DOOR LOCK SOLENOID SWITCH“ doesn’t change state failure message 9 will be
displayed. As long the contact stay closed, failure message 9 stays on the display. If the contact should
change state, the error message will be removed from the display and machine will be ready for use again.
88
1. Check door handle for damage traces and
centering against door lock.
If handle is damaged, replace handle.
If not good centered, center door against door lock.
2. Check if the input connector DL (door lock)
is connected.
If the input connector DL (door lock) is not connected :
connect connector DL.
3. Check the well functioning of the door lock
switch.
If the door lock switch is broken or doesn't function
correct: replace the door lock
4. Check the door lock coil. If the door lock coil doesn’t function: replace the door
lock coil.
5. Check the mechanical functionality of the
door lock.
If the door lock is not functioning mechanically and can
not be corrected: replace the door lock system.
6. Check the continuity of the wiring. If the wiring is not continuous : repair the wiring.
7. Check the output relay that powers the door
lock coil.
If the relay is broken, replace the wash computer.
8. Check the good functioning of the door
lock switch at the inputs menu.
If the input is not functional replace the wash
computer.
1. Check the functioning of the door lock
switch.
If the door switch is broken or doesn't function correct:
replace the door lock.
2. Check the door lock coil. If the door lock coil doesn’t function: replace the door lock.
3. Check the mechanical functionality
of the door lock.
If the door lock is not functioning mechanically and can not
be corrected: replace the door lock system.
4. Check the continuity of the wiring. If the wiring is not continuous: repair the wiring.
5. Check the output relay that powers
the door lock coil.
If the relay stays closed and the relay is broken, replace
the wash computer.