Wersi Abacus, Руководство пользователя

Страница: 33 / 96

PLEASE NOTE: The first 500 Total Preset IDs are write-protected. If they do not currently contain Total Pre -
sets, they are reserved for future software updates. If you want to modify any of the Factory Total Presets,
you must save them as a User Preset in the same way described on the previous page. You can store any of
your Total Presets into any of the available slots that are designated as ‘Free’. Naturally, you can also over-
write your own User Total Presets.
Please also be careful when you are saving Total Presets as to not overwrite any Total Preset that you wish to
keep!
With the OpenArt-System, you can decide on what settings you wish to save into your Total Presets. All that you have
to do is simply press the ‘Tick Box’ that corresponds to the relevant settings that you wish to save into your Total Pre -
set.
The Different Settings That Can Be Saved Into A Total Preset
• Sounds - The sounds for all manuals and all sound related functions as Dynamics, Panorama, Chorus etc. Also, all other
sound-settings such as Arabic tuning, Hermode tuning, LM-Hold, the WERSI-Chord settings, the pedal mono settings and the
direct selection options are also saved when ticking the ‘Sounds’ box.
• Manual Volumes - Directly below the Sounds tick box, is the box marked ‘Volumes’. By ‘ticking’ this box, the Total Preset will
store all of the volumes for the sound selectors (for all manuals and pedals).
• Accomp - The currently selected accompaniment and accompaniment settings will be saved by ‘ticking’ this box.
• Accompaniment Volumes - By ticking this box, all volumes relating to the accompaniment section will be saved.
• Transpose - By ticking this box, the current Transpose settings will be stored in the Total Preset.
• Microphone - Ticking this box will store the ‘Microphone 1’ settings. It also stores the Micro 1 effects.
• Split Points - When you ‘tick’ this box, the active Split Points will be stored for both manuals. When the preset is recalled, the
split points will re-activate to the same settings as when you saved them.
• Footswitches - When you select a Total Preset, the footswitch functions will be set to the state they were when the Total Preset
was saved. If you do not wish to save the Footswitch settings, the footswitch functions will assume default settings.
• Rotor Slow / Fast - This option allows you to save whether the Rotor Slow / Fast function is actived or deactivated.
• Display Neigung - WERSI Xenios XE-20 Only. This check box allows you to store the motorized angle of the Xenios display.
• Mixer - This option allows you to save the currently selected Mixer Preset.
• Reverb - By ticking this box, the currently selected Reverb Presets are saved into the Total Preset.
• Delay - By ticking this box, the currently selected Delay (Echo) Presets are saved into the Total Preset.
• Chorus - By ticking this box, the currently selected Chorus Presets are saved into the Total Preset.
• Sound Effects - By ticking this box, you can save the currently selected Sound Effect (SFX) Preset. .
• Harmonizer - By ticking this.box, the current Harmoniser / Vocoder Preset is saved into the Total Preset.
After selecting the settings you want to save in your Total Preset, you can press the button ‘Save Total Preset’. The
current settings and registrations will be saved at the selected Total Preset ID number (Save location). The newly
saved Total Preset then becomes the active Total Preset, and the ‘Save Total Preset’ window will close.
PLEASE NOTE: Using the ‘Back’ button will close the ‘Save Total Preset’ window without saving a Total Pre-
set.
Simply by pressing one of the ‘Boxes’ a tick will appear in the
box. All boxes displaying ‘ticks’ will be saved into your new Total
Preset.