Wersi Abacus, Руководство пользователя

Страница: 27 / 96

An Up Close Look At The Manual Assignments And The Data They Contain
Outter Blue Rim Key Range (Showing Manual Split)
(Indicates which Selector is active)
The Selector
(Selector 1, Upper Manual
in our example)
Sound Name The Volume of the Selector (Grey Bar)
(The name of the sound (Indicated the current volume of the
currently assigned to the Selector / Total Preset)
the Selector)
13.10 The Manual Split Buttons
In the middle, just below the Manual Assignment Display, you can see the above buttons. These buttons allow you to
split the manuals (Upper and Lower Manuals). The Pedals can not be split.
PLEASE NOTE: Make sure that you do not have the Piano Mode active as this will cancel any Splits you wish
to assign to the Manuals.
To Split the Upper Manual for example, touch the button called
‘Split’ next to the Upper Manual surface.
A new small display will appear called ‘Split Settings’. In this
display you can choose how you wish to split your sounds.
For example you can have 1 sound below the split point, and 2
sounds above the split point or a combination of varying
possibilities. To change any of the split modes / combinations,
simply press the ‘Change Split Distribution’ button.
You can cycle through the different distribution modes simply by
repeatedly pressing the ‘Change Split Distribution’ button. Eventually it cycles back to the first distribution option. This
process is the same for the Lower Manual Split Distribution too.
13.11 Setting The Split Point
To set the Split Point on the Upper and Lower Manuals, simply press the ‘Split’ button and then play the key on the
actual keyboard Manual to define the actual Split Point.
PLEASE NOTE: Remember that the Upper Manual has its own Split button
and that the Lower Manual also has its own Split button. You must Press
the Upper ‘Split’ button to set the Split of the Upper Manual and you must
Press the Lower ‘Split’ button to set the split of the Lower Manual.
Deactivating The Split Point
To deactivate the split point, simply press the Split button for the manual that you wish to deactivate the Split Point
for and press the last key to the left on the relevant Manual. (For example, to deactivate the Split Point on the Upper
Manual, press the Upper Split button and then press the Lowest ‘C’ note (First note to the far left) on the Keyboard
Manual. The split point is now cancelled / deactivated. Follow this same process for the Lower Manual.
PLEASE NOTE: To exit from the Split Settings Screen without making any alterations to the Split Point or Dis-
tribution, simply press the ‘Back’ button to exit back to the Main Display.
Only the Upper Split button can change the
Upper Manual Split Settings
Only the Lower Split button can change the
Lower Manual Split Settings