Wersi Abacus, Руководство пользователя

Страница: 31 / 96

14.1 Selecting Total Presets
The Total Presets are arranged in banks of ten presets each. In order to select a specific Total Preset, first choose a
bank, using the the two << Bank >> push buttons, located in the Total Presets group.
<< Bank >> Push Buttons
The number of the currently selected ‘Bank’ and ‘Total Preset’ is shown in the Main Display (in the Accompaniment
Overview Display)
Push any of the push buttons (1 to 10) to select a specific Total Preset in the current bank.
The Total Preset name and the number of the selected Total Preset from 1 to the limit (set in the registry, but the limit
is 2000 from the Factory) appear in the centre of the Main Display near the bank number. The Main Display’s ‘sound
area’ shows the Sounds that the preset has assigned to the manuals and to the pedals.
PLEASE NOTE: The first 500 storage places for Total Presets are reserved for existing and future factory Total
Presets. When you change a Total Preset while playing, the new sound will become active only after released
the note you are playing and play the next note (or touch the next note). In this way, you can prepare for a
sound change while playing in a ‘
legato’
style.
When you are playing and wish to change a ‘Total Preset Bank’, you must also press one of the ten Total Preset but -
tons to activate the sound. Changing Bank alone will not physically change the Total Preset, merely the Bank of Total
Presets is changed and the user must then select a new Total Preset within the new Bank.
14.2 Direct Selection Of Total Presets
As an alternative to selecting Total Presets as described above, you may select Total Presets by directly entering their
number of choose them from the list of ‘all Total Presets’ in the OAS Total Presets Database. In order to do this, touch
the Preset Name ‘Status Bar’ (Where you see the Total Preset name in the Main Display). Press your finger on the
Total Preset name ‘Status Bar’ for a few seconds.
Press and Hold for a few seconds over the Total Preset name in the Total Preset ‘Status Bar’.
The following Screen will appear:
You can either ‘dial’ in the Total Preset number to find the desired
Total Preset, or scroll through the list of Total Presets.
In the bottom left corner, the button marked ‘1,2,3’
indicates that the Total Presets are listed in
numerical order.
When the button is marked as ‘A,B,C’ the
Total Presets will be listed in alphabetical
order.
Once you have found your Total Preset,
Simply hit the large ‘Select Preset’ button.