6
2.3
Control of inspection, measuring and test equipment
As part of quality assurance the measuring-related properties of the balance and the available
adjusting weight must be checked regularly. The responsible user must define a suitable interval
as well as the nature and scope of this test.
3
Precautions
•
Environmental conditions
: only use indoor, check the detailed environment conditions for
temperature and humidity in the technical details above.
•
Do not use the scale in any high temperature fluctuations and avoid strong airflows, vibrations
and dust. The balance could never get wet and make sure that the balance is not used in an
environment with extreme temperature and humidity.
•
Do not use the balance in explosive conditions.
•
Only use the extender cable, which with ground wire.
•
If the power line cable is damaged, the appliance must be unplugged immediately and the
power line cable be replaced.
•
Place the balance on a stable surface and set it horizontally with the help of the adjustable feet
and the spirit level.
•
The electronic balance is a precision measuring instrument and must be handled with great care.
Violation of limit of weighing range or impact can cause permanent damage to the balance.
•
The balance needs a warm up time for about 1 hour before using.
•
Please do not use aggressive cleaning agents (solvents or similar agents), but a cloth dampened
with mild soap suds. Ensure that no liquid penetrates into the device and wipe with a dry soft
cloth.
•
Do not overload the balance more than 20% of maximum load (Max). Do not press the pan with
a hand!
•
By maintenance please notice the information in
Chapter “Maintenance and Servicing”
.
•
If the balance seems not to operate properly, unplug it from the mains and do not use until
checked by authorized service.
•
All repairs and necessary regulations can be made by authorized personnel only.
4
Transportation and Storage
4.1
Acceptance check
When receiving the appliance, please check packaging immediately, and the appliance itself
when unpacking for possible visible damage.
4.2
Packing
•
Keep all parts of the original packaging for a possibly required return
•
Only use original packaging for returning.
•
Prior to dispatch disconnect all cables and remove loose/mobile parts.
•
Reattach possibly supplied transport securing devices.
