Wenglor P1XF001, Руководство по эксплуатации

Страница: 34 / 39

34 P1XF001
7.26. Password
Password protection prevents against unintended changing of the set data.
NOTE!
The menu item is only visible if the expert menu is set to “on”.
Function Description
Activating Activating or Deactivating the Password Function
Password

inactive

active
5

6
Password protection can be activated or deactivated with the 5 and 6 keys. When
password protection is activated, sensor operation is disabled after supply power
has been interrupted and is not enabled again until the password has been cor-
rectly entered.
Change
Password Entry for Enabling
Password
Change
0
+

–
A password within a range of 1 to 9999 can be selected using the + and – keys.
Selection is acknowledged by pressing the enter key.
Lock Locking the Sensor
Password
Activate
Change
Lock
5

6
Disabling the sensor inhibits its operation immediately, if “Activate password” is
set to on.
NOTE!
If the password function has been activated, the password must be entered each time supply power is
interrupted. After pressing any key, the menu is automatically switched to the password entry mode.
After the password has been correctly entered, the entire menu is enabled and the sensor can be ope-
rated. The password function is deactivated upon shipment from the factory.
It must be assured that the selected password is noted before any changes occur. If the password is
forgotten, it has to be overwritten with a master password. The master password can be requested by
e-mail from support@wenglor.com.