Wenglor P1XF001, Руководство по эксплуатации

Страница: 22 / 39

22 P1XF001
7.4. Pin function
The Pin function is used to determine the function of pins A1, E/A2, E/A3, A4, A5, A6, E/A7, A8, A9, A10, A11
and/or A12 since the pins may be used for different functions.
Function Description
Ax Configuration of Pin A1, 4, 5, 6, 8, 9, 10, 11 and/or 12
 Deactivated
 Switch
 Error
 Contamination

Back

Run
Deactivated: Deactivation of the output
Switch: Switching Output
Error: Error Output
Contamination: Contamination Output
E/Ax Configuration of Pin E/A2, 3 and/or 7

Deactivated

Switch

Error

Contamination

Emitted Light

T Extern

Trigger

Back

Run
Deactivated: Deactivation of the output
Switch: Switching Output
Error: Error Output
Contamination: Contamination Output
Emitted Light: Input for switching on/off the emitted light
T Extern: Teach input for Ax
Trigger: Input for sensor triggering
7.5. Windows-Teach-in
Function Description
T Windows Configuration of Pin A1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 or 12
<T> for Teach-in
T

Window teach-in procedure:
1) Align the spot to the background (if there is one) or the object.
2) Press the “T” key.
→
The switching points are taught in.
NOTE!
• T sample: additional teach-in of an OK or an NOK sample part in order
to adjust tolerances.
• Window width can be reduced or enlarged in the tolerance menu.
7.5.1.
Sample-Teach-in
T Sample
Sample teach
Teach OK/NOK
OK

NOK
Sample teach-in procedure:
1) Teach in an OK sample.
• Align the spot to the object.
• Press the “OK” key.
→
The tolerance is increased.
2) Teach in an NOK sample
• Align the spot to the object.
• Press the “NOK” key.
→
The tolerance is decreased.