Wenglor P1XF001, Руководство по эксплуатации

Страница: 16 / 39

16 P1XF001
6.2. Function Definitions
Name Function Page
Run Change to display mode 21
Pin-Function Selection of pin function 22
Windows-Teach-in Teach-in with window width (tolerance) 22
Sample-Teach-in Automatic tolerance adjustment based on a good part or a bad
part. 22
Assignment Teach-in Teach-in with assignment to the most similar output 22
Tolerance Window size for window teach-in 23
Output function Selection of NO or NC 24
Time Delay Adjustment of on-delay, off-delay and pulse 25
Switching Thresholds Manual shifting of the thresholds 26
Error or Contamination Output An output which is activated when the sensor is within an unre-
liable range 28
Emitted Light LED intensity setting 31
Trigger Input Setting for an input to which a trigger signal can be applied 23
External Teach-in Input Setting for an input at which an output is taught in by applying
an electrical signal 29
Display Display settings 29
Expert menu Selection of whether a partial or the entire scope of functions
will appear at the display 30
Operating Mode Selection of the “Detection” or the “Assignment” mode 30
Filter Selection of the number of values used by the sensor to genera-
te a mean value 31
Test Input For checking to ensure that the outputs are correctly connected 32
Interface Baud rate setting 32
Language User language selection 33
Info Information regarding the device 33
Reset Restoration of default settings 33
Password Changing the password and disabling the display 34