32
P1XF001
7.21. Test Input
This functions changes the outputs manually, regardless of the sensor’s momentary measured value. This
makes it possible to monitor, for example, whether or not outputs are correctly connected to a controller, or if
there’s a disturbance in the cable which is altering the analog value. It’s also possible to test whether or not
voltage is being applied to the input pin. The test is ended automatically when the test menu is exited.
NOTE!
The menu item is only visible if Expert Menu “On” has been set. Only the functions for which the pin
is set are displayed in each case.
Function
Description
E/A Test
E/A Test of the inputs and outputs
Test A1
Test E/A2
Test …
Test A12
Back
Run
Ax test:
On: activate output (24 V)
Off: deactivate output (0 V)
Ex test:
Display whether 0 V or 24 V is being applied to input 4.
7.22. Interface
NOTE!
The menu item is only visible if the expert menu is set to “on”.
Function
Description
Baud rate
Setting the baud rate
4800
9600
19200
38400
57600
115200
Back
Run
4800:
4800 Baud
9600:
9600 Baud
19200:
9200 Baud
38400:
38400 Baud (standard setting)
57600:
57600 Baud
115200:
115200 Baud
Содержание P1XF001
Страница 9: ...9 Color Sensor 3 1 Housing dimensions...
