Wenglor OY1TA603P0003, Руководство по эксплуатации

Страница: 46 / 64

46
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
EN
Designation Function Key designation
NPN/PNP Configuring the outputs P

N
Outputs are set to PNP, push-pull or NPN by pressing the P or the N key.
The respective circuit diagram is displayed.
NO/NC Configuring the outputs NO

NC
Outputs can be set up as normally open or normally closed by pressing the NO
or the NC key. The respective circuit diagram is displayed.
ON Delay Adjusting ON Delay +  –
On-delay can be set to a value within
a range of 0 to 10,000 ms by pressing
the + or the – key..
OFF Delay Adjusting OFF Delay +  –
Off-delay is adjusted by pressing the
+ or the – key. Off-delay is disabled if
a impulse duration has already been
selected. If this is the case, Impulse!
appears at the control panel.
Impulse Adjusting imulse duration +  –
Impulse duration defines how long the
output signal remains in the activated
state. Impulse duration can be set to a
value within a range of 0 to 10,000 ms
by pressing the + or the – key. After
the selected impulse duration has
elapsed, the output signal is returned
to the deactivated state..
Function can be combined with
ON-delay.
Object
OFF Delay
Output