7
Inductive Sensors
2.2 Use for Other than the Intended Purpose
• No safety components in accordance with 2006/42/EC (Machinery Directive).
• The product is not suitable for use in potentially explosive atmospheres.
• The product may be used only with accessories supplied or approved by wenglor, or in combination with
approved products. A list of approved accessories and combination products can be found at
www.wenglor.com on the product detail page.
DANGER!
Risk of personal injury or property damage in case of use for other than the intended
purpose!
Use for other than the intended purpose may lead to hazardous situations.
• Observe instructions regarding use for intended purpose.
2.3 Personnel Qualifications
• Suitable technical training is a prerequisite.
• In-house electronics training is required.
• Trained personnel must have (permanent) access to the operating instructions.
DANGER!
Risk of personal injury or property damage in case of incorrect initial start-up and
maintenance!
Personal injury and damage to equipment may occur.
• Adequate training and qualification of personnel
2.4 Modification of Products
DANGER!
Risk of personal injury or property damage if the product is modified.
Personal injury and damage to equipment may occur. Non-observance may result in loss of
the CE mark, and the guarantee may be rendered null and void.
• Modification of the product is not permitted.
2.5 General Safety Precautions
NOTE!
• These instructions are an integral part of the product and must be kept on hand for the
entire duration of its service life.
• In the event of possible changes, the respectively current version of the operating
instructions can be found at www.wenglor.com in the product’s separate download area.
• Read the operating instructions carefully before using the product.
• Protect sensor against contamination and mechanical influences.
