Wenglor A1P05, Руководство по эксплуатации

Страница: 14 / 21

14
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
EN
Connecting the Sensor to a PC, a Controller etc. with the wenglor
®
-S232W3 Plug Adapter
Plug connectors included with the wenglor
®
S232W3 plug adapter:
• 8-pin M12 plug connector for connecting the power supply and the outputs
• 8-pin M12 socket connector for direct Sensor connection
• 9-pin M12 sub-miniature socket connector for direct connection to the RS-232 interface at the PC, or the
utilized controller
Installing the wenglor
®
S232W3 plug adapter:
• Switch off the power supply
• Set the rotary selector switch
Ý
to RS-232
• Disconnect the 8-conductor connector cable (S80-xx) from the Sensor
• Connect the S232W3 plug adapter directly to the Sensor
• Connect the 8-conductor connector cable (S80-xx) to the plug adapter
• Connect the 9-pin sub-miniature socket connector to the serial interface at the PC
• Switch the power supply on
Sensor
S232W2
PC or Controller
RS232
Power Supply
Outputs
Connecting the Sensor
to a PC or a Controller
Protocol for Communications via the RS-232 Interface
Control Characters
Character ASCII HEX Function
/ 47 2Fh Start character
. 46 2Eh Stop bit
NAK 21 15h Negative acknowledge
BCC 2 Byte qq Checksum
Table 6