17
Connect Lockers (continued)
Connect Locker Sides Together (continued)
Important: Procedure is the same for lockers with or without metal base.
1. Check that each locker is level vertically and adjacent lockers are level along the tops.
Make any necessary leveling adjustments before connecting the locker sides together.
2. Be sure that the front pilot holes in the end panels are aligned and connect the locker units
together using 1/4-20 x 1.181" connector bolts (15) and 1/4-20 cap nuts (16).
1/4-20
Cap Nut
(16)
1/4-20 x 1.181"
Connector Bolt
(15)
3. If installing island mounted lockers continue to the following page.
If installing wall mounted lockers skip to "Secure Lockers to the Structure (Wall Mount Configurations Only)"
on page 19.
Each locker must be
level vertically and
adjacent lockers must be
level along the tops