manualshive.com logo in svg

Wenger Gearboss Customizable Wood Lockers, Инструкции по установке и эксплуатации, Страница: 1 / 28

Поделиться
Скачать
Wenger Gearboss Customizable Wood Lockers Скачать руководство пользователя страница 1

Installation and Owner's Instructions

Customizable Wood Lockers

©Wenger Corporation 2021 

Printed in USA 2021-11 

Part #241D497-11

Wenger Corporation,

 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Contents

Note: 

Please read and understand these instructions before starting the assembly or installation.

Note: 

If you need additional information, contact Wenger Corporation using the information below.

Visit the GearBoss Customizable Wood Lockers web page at gearboss.com for more information.

Locker with 

Metal Base

Locker without 

Metal Base

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Fastener Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Fasteners - Not Supplied  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Layout Configurations

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Wood Locker with Metal Base Components . . . . . . . . . . . . . . . . . 6

Wood Locker without Metal Base Components  . . . . . . . . . . . . . . 7

Electrical Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation with Metal Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installation without Metal Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connect Lockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connect Locker Sides Together  . . . . . . . . . . . . . . . . . . . . . . 16

Connect Locker Backs Together (Island Mount Only)   . . . . . 18

Secure to Structure (Wall Mount Only)  . . . . . . . . . . . . . . . . . 19

Secure to Structure (Island Mount Only). . . . . . . . . . . . . . . . 20

Side Closure Panel Installation for Lockers with Metal Base . . . . 21

Side Closure Panel Installation for Lockers without Metal Base. . 23

Helmet & Shoulder Pad Accessory Installation . . . . . . . . . . . . . . . 26

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Содержание Gearboss Customizable Wood Lockers





























Отзывы:

Нет отзывов