background image

1

Owner’s Manual

WPC-15000

Please read and save these instructions. Read carefully before attempting to assemble, install, oper-

ate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions 

could result in personal injury and property damage! Retain instructions for future reference.

Weltem Modular Mul   Air condi  oner feature mul  -func  on spot cooler providing various acces-
sories available to 

fi

 t customer needs. This Unit is used to spot cooling for large areas where cool-

ing of the en  re area is not prac  cal or possible. A dedicated spot cooling thermostat controls the 
unit in this applica  on. This Unit can also be used in smaller areas for room cooling.
A control panel provides ease of use and contains a self-diagnos  c func  on and display, showing 
opera  ng modes, room and set temperatures, and faults, If an abnormal opera  on occurs, a visual 
display of the fault is shown. 
Suitable applica  ons include : 
a factory or work place, computer rooms, emergency cooling, outdoor event, etc..

A  er unpacking the unit, carefully inspect unit for any damage that may have occurred during 
transit. Check for any loose, missing or damaged parts.

Descrip

Ɵ

 on

Unpacking

WMC-2500

Figure 1

Owner’s Manual

WMC-2500

Modular Multi Air Conditioner

by

WMC

Fig

Содержание AmeriCool WMC-2500
























Отзывы: