WELLTECH WPoE-2426, Руководство пользователя

Страница: 21 / 280

2-2 Time
This page configures the switch Time. Time configured is including Time Configuration and
NTP Configuration.
2-2.1 Manual
The switch provides manual and automatic ways to set the system time via NTP. Manual
setting is simple and you just input “Year”, “Month”, “Day”, “Hour”, “Minute” and “Second”
within the valid value range indicated in each item.
Web Interface
To configure Time in the web interface:
1. Click Time , Manual.
2. Specify the Time parameter in manual parameters.
3. Click Save.
Figure 2-2.1: The time configuration
Parameter description:

Clock Source:
To click what clock source for the WPoE-2426. You can select “Use local
Settings” or “Use NTP Server” for WPoE-2426 time clock source.

Local Time:
Show the current time of the system.

Time Zone Offset:
Provide the time zone offset relative to UTC/GMT. The offset is given in minutes
east of GMT. The valid range is from -720 to 720 minutes

Daylight Saving:
Daylight saving is adopted in some countries. If set, it will adjust the time lag
or in advance in unit of hours, according to the starting date and the ending
date. For example, if you set the day light saving to be 1 hour. When the time
passed over the starting time, the system time will be increased one hour after
one minute at the time since it passed over. And when the time passed over
the ending time, the system time will be decreased one hour after one minute
at the time since it passed over.
The switch supports valid configurable day light saving time is –5 to +5 step
one hour. The zero for this parameter means it need not have to adjust current
time, equivalent to in-act daylight saving. You don’t have to set the
starting/ending date as well. If you set daylight saving to be non-zero, you