WELLTECH WPoE-2426 Скачать руководство пользователя страница 234

Страница: 234 / 280

Publication date: August, 2012

Revision 1.0

Welltech Technology Co., Ltd.

222



Port VLAN ID :

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not

overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is appended to the

VLAN ID. Read more about RADIUS-assigned VLANs here.
If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. Read more

about Guest VLANs here.



Auto-refresh :

To evoke the auto-refresh icon then the device will refresh the information automatically.



Upper right icon (Refresh):

You can click them for refresh the NAS Switch Status by manual.

Содержание WPoE-2426

























































































































































































































































































Результаты поиска

Содержание WPoE-2426

Отзывы:

Бренды по названию

Популярные бренды

WELLTECH WPoE-2426, Руководство пользователя

Результаты поиска

Содержание WPoE-2426

Отзывы:

Бренды по названию

Популярные бренды