WELLTECH WPoE-2426, Руководство пользователя

Страница: 53 / 280

3-1.6 SFP Information
This section describes the switch could display the SFP module detail information which you
connect it to the switch. The information includes: Connector type, Fiber type, wavelength,
baud rate and Vendor OUI and etc.
Web Interface
To Display the SFP information in the web interface:
1. Click Configuration, Port, then SFP Information.
2. To display the SFP Information.
Figure 3-1.6: The SFP Information Overview
Parameter description:

Connector Type:
Display the connector type, for instance, UTP, SC, ST, LC and so on.

Fiber Type:
Display the fiber mode, for instance, Multi-Mode, Single-Mode.

Tx Central Wavelength:
Display the fiber optical transmitting central wavelength, for instance, 850nm,
1310nm, 1550nm and so on.

Baud Rate:
Display the maximum baud rate of the fiber module supported, for instance,
10M, 100M, 1G and so on.

Vendor OUI:
Display the Manufacturer's OUI code which is assigned by IEEE.

Vendor Name:
Display the company name of the module manufacturer.

Vendor P/N:
Display the product name of the naming by module manufacturer.

Vendor Rev (Revision):
Display the module revision.

Vendor SN (Serial Number):