WELLTECH 2540 FXO, Руководство пользователя, Страница: 6 / 79

6
LED Description
Power When the power adapter is connected, the LED will light
up green.
Status When system is startup successfully, the LED will light up
green.
Proxy When the gateway is registered successfully to a Proxy,
this will light up green.
WAN This will light up green when the gateway’s WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
The default IP of WAN port is 10.1.1.3.
LAN This will light up green when the gateway’s LAN port is
physically connected to a local network (Refer to Rear
Panel section in page number for location of LAN port).
When data is transmitted through this port, it will flash
green.
The default IP of LAN port is 192.168.123.123.
Line1~Line4 The status LED for FXO port 1-4, this will light up amber
orange when the connected phone is engaged in a
conversation. It will flash amber orange when there is an
incoming call.
1-5 Rear Panel: LED Indicators
WellGate 2540
Figure 1-4-1 rear panel for FXO
Item Description
Reset Press and hold over 5 seconds to reload factory default
setting, this will erase all existing settings configured on
this gateway.
L1 - L4 The status LED for FXO port 1-4. When there is no PSTN