WELLTECH 2540 FXO, Руководство пользователя, Страница: 13 / 79

13

VOIP VLAN: Enable VOIP VLAN or not. When enable VOIP VLAN, the
WAN port can be only accessed by VLAN. If it is required to manage the
WellGate 2540, Administrator can use LAN port instead.

VOIP VLAN ID(2-4096): VLAN ID Used
Note: the default WAN IP address is 10.1.1.3.
LAN Setting:

Management mode: This LAN port is used for management purpose,
not used for register or routing.

NAT mode: DHCP function on the LAN port. The LAN ports will function
as a DHCP server, network devices connected to them will be issued
with IP addresses. (On the lift item will add a NAT setting, the
information please refer NAT setting)

IP Address
:
IP address (please set to 192.168.x.x if your WAN port is
using 10.x.x.x IP segment, the IP address must different as WAN IP).

Netmask: IP network mask

Bridge mode: At this mode, both WAN and LAN ports are configured to
Switch/Hub features. LAN port access to WAN port directly.
Note: default LAN IP address is 192.168.123.123
DDNS (DynDNS) Setting:

DDNS (DynDNS): enable or disable dynamic DNS feature.

Domain Name: input your Domain Name

User Name: input your user name

Password: input your password