WELLSYSTEM Medical_Plus, Руководство по эксплуатации

Страница: 130 / 144

Presettings
58/70
6 Presettings
Operating states can be called up and presettings entered in service / preset
mode.
See page 31.
–
Insert service card.
– The code for the last function setting is displayed on the screen e.g. 06
and SER alternating.
– Press the massage pressure button to display the current setting for this
function, e.g. 10.00.
– Press the plus or minus button (5) to modify the setting.
– Press the massage pressure button (20) to confirm the setting. 06 will be
displayed on the screen again.
– Press the plus button (5) to scroll up to the next function.
– Press the minus button (5) to scroll down to the next function.
No. Description On delivery Values from - to
Total operating hours
(Reset: Press the plus and minus keys simultaneously) 0 0 - 9999
Operating hours since the last service
(Reset: Press the plus and minus keys simultaneously)
0 0 - 9999
Water temperature unit
The change from °C to °F and back is done by conversion; the
actual temperature may vary slightly.
°C °F, °C
Time controller
(FREE = freely selectable massage time, SEAL = default time
setting, COIN = coin operation) FREE FREE, SEAL, COIN
Maximum massage time in minutes (when Setting 04 = FREE) 30 5 - 45
Default massage time / chip card program time in minutes
(when Setting 04 = SEAL) 30 5 - 45
Water default temperature setting in °C
Water default temperature setting in °F 35
95 20 - 40
68 - 104
Actual water temperature in °C or °F – –
Normal operation = FREE – see 'Expanding the chip card func-
tions'; chip card-dependent operation = PAY FREE FREE, PAY
Chip card upgrading – see 'Expanding the chip card functions'
(number of massages) 20 1 - 50
Reset the device default status (i.e. delivery status) by pressing
the plus and minus buttons simultaneously and holding them
down.
– RSET
Programming mode
(OFF = programming mode switched off, PHAS = phase mode
programming, FREE = free, specific programming)
OFF OFF, PHAS, FREE