WELLSYSTEM Medical_Plus, Руководство по эксплуатации

Страница: 119 / 144

Operation
03/2018 1009909-05 Operating instructions – 47/70
Operating
button Settings /
Display Remarks
Altering the nozzle
carriage speed, e.g.
from
to
Press the speed button and hold
down for approx. 1 s. The display will
flash. Press the plus or minus buttons
to set up the value that you want.
Factory setting: SP.15
Minimum and maximum speeds:
05 to 30 in increments of 1
Altering the back
length,
e.g. from
to
Press the back length button and hold
down for approx. 1 s. Display flashes.
Press the plus or minus buttons to set
up the value that you want, see pa-
ge 30.
Factory setting: 55
Minimum and maximum back lengths
in cm:
45 to 65 increments of 1
Altering the water jet Factory setting: Pulse massage inac-
tive
Pressing the pulse button to activate
pulse massage: The water jet will be
continually interrupted.
The diode is illuminated.
Deactivating the pulse massage op-
tion: Press the pulse button again
Altering the massage area and the type of massage
NOTE:
The zone or point massage selection only functions when
the nozzles are moving from the head end to the foot end.
If you have missed the right moment:

First select whole body massage again.

Wait until the nozzles reach the desired position while
moving from the head end.

Press zone or point massage.
– Press the new massage area button.
– Press the new massage type button.
Massage area default factory setting: Whole body
Massage type default factory setting: Parallel stroke